HI-LO TROMBONE VALVE by MTM HYDRO (6073)

MTM Hydro's Trombone Valve Nozzle Holder offers a 2-in-1 for high pressure cleaning combined with low pressure chemical application. This new favorite of the Soft Wash Industry is practical, economical, and is installed quickly on any 1/4" M NPT lance or plug. For setup, install the 1/4" threaded high pressure nozzle your pressure washer requires on the top port along with a 1/4" threaded chem nozzle at the bottom port. Pressure relief is fast and only requires that you release the gun trigger, pull the valve stem to open the low-pressure side and re-engage the spray gun. Do not pull valve stem while under pressure as this may cause injury.  

• 1/4"F Inlet x Twin 1/4"F Outlets
• Max - 4,000 PSI
• Max - 8 GPM
• Max - 195° F