HURRICANE CAT 5 TWO-PART URETHANE SEALER - 7 GALLON KIT (8407) by TRIDENT

ULTRA SURFACE ENHANCEMENT

• Deeply enhances surface with wet look and gloss finish - the extent is dependent on the surface

OPTIMAL JOINT STABILIZATION

• Hardens joint sand which reduces sand washout, weeds and insect infestation

ULTIMATE SURFACE PROTECTION

• Guards against salt, mild acid, alkali and other corrosives
• Provides stain resistance which makes cleaning and maintenance easier
• Antifungal film protection protects sealer film from mold, moss and algae

ARMOR BOND

• Creates strongest joint stabilization

T3 TRUE TONE TECHNOLOGY

• Deepest color enhancement with high-gloss finish

ULTRA DURABILITY SURFACE PROTECTION

• Ideal for high traffic areas where ultimate durability and superior chemical resistance is desired

FUNGAL GUARD

• Added antifungal protects sealer film from mold, moss and algae

BREATHABLE, IMMEDIATE APPLICATION

• Will not trap naturally occurring efflorescence and/or moisture
• Can be applied on most new, clean and dry surfaces without waiting

DRY OR DAMP, TWO COAT APPLICATION

• Apply to dry surface for optimal joint stabilization performance
• When sealing without joint stabilization, can be applied to a dry or damp surface with no pooling or ponding of water present
• For optimal performance, apply two coats

PROPRIETARY TWO-PART WATER REDUCIBLE, CLEAR ALIPHATIC URETHANE CHEMISTRY

• Super concentrated sealer packaged as a kit containing one 5 gallon pail of Part A and two 1 gallon containers of Part B. Mixing required.
• Water dilution required providing options for desired level of sheen and strength of joint stabilization
• Will not yellow under exposure to sunlight

FILM FORMING, WATER BASED, LOW VOC SEALER

• Consistency of water, milky white in appearance when applied. Dries clear.

CONCRETE

STAMPED CONCRETE

CONCRETE WALL BLOCK

CLAY PAVERS

NATURAL STONE

MANUFACTURED STONE

TRAVERTINE

EXPOSED AGGREGATE

Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer.

PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance.

• Variable speed drill, paddle mixer
• Clean five gallon pail(s)
• Low pressure, high volume sprayer such as an airless sprayer or hand held pump-up sprayer
• Foam squeegee for joint stabilization
• Slit foam roller
• Paint shield

SEALING WITH JOINT STABILIZATION

• 80-120 square feet
• 7.4-11.1 square meters

SEALING ONLY WITHOUT JOINT STABILIZATION

• 200-300 square feet
• 18.6-27.9 square meters

Coverage per gallon once mixed and diluted. Single application. Actual coverage may vary depending on type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature. For more uniform coverage, a second coat should be applied as soon as practical after the first application has visually cleared and is dry to the touch, which is usually one hour.