SEA WALL SEALER by TRIDENT (8409)

Product Information

Sea Wall is a high-performance silane/siloxane blend that protects the surface from water penetration, salt & freeze/thaw damage. Its advanced reactive chemistry and EZ Nano Technology provides the ultimate in surface protection. Sea Wall is a solvent based invisible penetrating sealer. 

FEATURES

ADVANCED REACTIVE CHEMISTRY AND EZ NANO TECHNOLOGY

  • Provides ultimate surface protection against water and salt infiltration
  • Prevents surface spalling caused by freeze/thaw environments

SUPERIOR WATER REPELLENCY

  • Inhibits biological growth such as mold, moss & algae

HIGH PERFORMANCE SILANE/SILOXANE BLEND

  • Does not contain any silicone or wax components

BREATHABLE, IMMEDIATE APPLICATION

  • Will not trap naturally occurring efflorescence and/or moisture
  • Can be applied on a new, clean and dry surface without waiting* (see Surface Preparation in application instructions)

EASY TO APPLY

  • Applies easily on dry or damp surfaces
  • Apply two coats wet-on-wet for optimal performance

INVISIBLE PENETRATING SOLVSENT BASED SEALER

  • Does not alter the appearance of the surface (some surfaces may darken slightly)
  • Non-film forming
  • Consistency of water and clear in appearance when applied. Dries transparent.

TEMPERATURE STABLE

  • Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C)

IDEAL APPLICATIONS

Driveways, Walk Ways/Stairs, Garage Floors, Industrial Flooring, Building Entrances, Shopping Malls, Restaurant Drive-Thrus, Dumpster Pads

Any high use hardscape surface where protection from water and salt are important.

SUITABLE SURFACES

Concrete

CONCRETE

Stamped Concrete

STAMPED CONCRETE

Concrete Wall Block

CONCRETE WALL BLOCK

Clay Pavers

CLAY PAVERS

Natural Stone

NATURAL STONE

Manufactured Stone

MANUFACTURED STONE

Travertine

TRAVERTINE

Exposed Aggregate

EXPOSED AGGREGATE

Grout

GROUT

Clay Roof

Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer. Do not use on asphalt. Performance may vary on limestone. Test first to verify performance and appearance before applying.

PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance.

COVERAGE PER GALLON

PAVERS & OTHER HARDSCAPE SURFACES

  • 75-200 square feet
  • 7 - 18.6 square meters

CONCRETE

  • 100-200 square feet
  • 9.3-18.6 square meters

RETAINING WALLS & OTHER VERTICAL SURFACES

  • 50-200 square feet
  • 4.6-18.6 square meters

 

Coverage based on two coats applied wet-on-wet at right angles to first coat. Use approximately two thirds of the estimated amount on the first coat and one third on the second ensuring saturation. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature.

 

Price
$395
Taxes and shipping calculated at checkout
In stock and ready for shipping

Frequently Bought Together

Recommended for You