ST-36 SLUDGE PUMP KITS by SUTTNER

PLEASE NOTE!!! The 1 1/2" spiroflex hose is NOT AVAILABLE and there is no solid ETA on additional availability.  We recommend utilizing a discharge hose from a local pool store.

Applications:

Attaches to pressure washer and turns it into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills.

Features:

• Water flowing through the high pressure nozzle creates a
powerful venturi suction that vacuums up slurry solutions.

• Debris as large as 3/4” will pass through the casting and
out the discharge hose.

• Vacuums up liquid slurries at a ratio of 11:1
(Example: 4 GPM will produce an output of 44 GPM).

• Used with 1 1/2" Spiroflex hose.

• The kits INCLUDE 20' of hose AND 3/8" MPT Plug on inlet

Technical Notes:

The high pressure line of the pressure washer is connected to the sludge vacuum attachment. The operator may connect the high pressure hose to the sludge vacuum inlet, or choose to hook the wand to the inlet. Water flow can then be controlled with the trigger gun. The inlet is normally a 1/4" QC plug or M22 screw nipple for quick attachment. After securing the attachment, run the pressure washer as normally instructed.

The velocity of the water flow exiting the nozzle creates a powerful venturi suction. This suction power can pick up slurry, along with rocks and debris up to 3/4" diameter. Ensure the outlet hose is directed properly and place the sludge vacuum into the flood waters. It may be submerged all the way to the floor. 

The discharge hose is normally 15' to 25' feet long.  Operators may need to check with authorities to see about discharging into storm sewers.

Product Spec Sheet Available Here