UNDO WOOD STRIPPER

Wood restoration made easy!

This sodium hydroxide-based product is designed to clean oil-based finishes from outdoor wood structures such as decks, fences and retaining walls. This product well as a strong stripper.  This product can be used in HOT or COLD water. "UNDO" contains sodium hydroxide.  Neutralize after rinsing with "ILLUMINATE" for best results.

What is the approximate coverage rate?

2 lb jar will cover approximately 750 sq feet.

How do I mix UNDO?

If you use the 2 lb jar, empty the entire jar into a 5 gallon pail. Fill with water and mix. Allow time for the powder to dissolve thoroughly.

If you use the 10 lb pail, a measured scoop will be included. Follow the mixing directions above.

How do I use UNDO?

Complete a test patch by spraying UNDO and allowing it to dwell for approximately 5 to 20 minutes. Depending on the stain conditions, this dwell time may need to be adjusted. This is the reason the test patch is important. Coverage Rate: 2 lb. jar makes 5 gallons of ready to use product which covers 750 square feet.

Once the adequate dwell time has elapsed, wash the wood thoroughly.

What should I apply after UNDO?

Apply ILLUMINATE.

When it's time to stain, don't forget to use quality brushes and flat pads. Quality applicators will make a difference in your finish.

Remember to keep a copy of your product's Safety Data Sheet within arm's reach during the transport of your soaps and chemicals.

Click Here to see this product's SDS.

 Don't forget to download the NAPWO app.